ROBERTS 6700 adhesive was designed for exterior or interior carpet installation and is a solvent-free for reduced health risks, a lower environmental footprint and high initial grab. This non-flammable adhesive may be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires. Use this adhesive to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings.
Make sure this fitsby entering your model number.
For adhering most indoor/outdoor carpets and is ideal for decks, sunrooms and basements
Bonds with concrete, APA rated marine grade plywood, aged asphalt paving (hot applied), fiberglass and aluminum when surface is clean and roughened to promote bonding
Suitable for indoor and outdoor use
Moisture Control Adhesive – up to 5 lbs. MVER and 80% RH
Up to 30 minutes open time, 60 minutes working time and 24 to 48 hours curing time
Approximately 65 to 75, 90 to 110 and 100 to 120 sq. ft. per gallon coverage for smooth, polypropylene/woven, and non-woven/rough-backed carpet installations respectively
Suggested for use with a 1/8 in. x 1/8 in. x 1/8 in. U-notch trowel, 1/8 in. x 1/8 in. x 1/16 in. V-notch trowel, or 3/32 in. x 3/32 in. x 3/32 in. V-notch trowel depending on carpet installation type
Enviro-friendly, solvent-free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
CRI Green Label Plus Certified - GLP no. 36471
[amz_corss_sell asin="B079QCBN27"]
Reviews
There are no reviews yet.